08-21/18:24:53  INFO [main] DefaultServerSetup - Init DB connection pools
08-21/18:25:04  INFO [main] DefaultServerSetup - Init trash pools..
08-21/18:25:07  INFO [main] Radius - Starting radius auth_port:1812  acct_port:1813 admin_port:1955
08-21/18:25:07  INFO [main] Radius - Init processor
        class: bitel.billing.server.processor.dialup.DialUpProcessor
        mid: 1
08-21/18:25:09  INFO [Thread-21] radius - Starting PortListener port=1813|type=ACCOUNT_LISTENER
08-21/18:25:09  INFO [Thread-20] radius - Starting PortListener port=1812|type=AUTH_LISTENER
08-21/18:25:09  INFO [Thread-22] AdminPortListener - Starting AdminPortListener on 1955
08-21/18:25:21  INFO [pool-1-thread-1] radius -  AUTH:
Type=AUTHENTICATION_REQUEST
Attributes:
        User-Name=bis
        NAS-IP-Address=127.0.0.1
        NAS-Port=0
        Service-Type=2
        Framed-Protocol=1
        Calling-Station-Id=192.168.1.105
        MS-CHAP2-Response=?.?~5..?dY???y???.........?S?©$??#???N??#.r?g"h.??
        MS-CHAP-Challenge=s],?M???<?0?(...

08-21/18:25:25  INFO [pool-1-thread-1] radius -  RESPONSE:
Type=AUTHENTICATION_REJECT
Process time auth: 3991 common_auth: 3672
Attributes:
        Reply-Message=2

08-21/18:29:21  INFO [pool-1-thread-2] radius -  AUTH:
Type=AUTHENTICATION_REQUEST
Attributes:
        User-Name=bis
        NAS-IP-Address=127.0.0.1
        NAS-Port=0
        Service-Type=2
        Framed-Protocol=1
        Calling-Station-Id=192.168.1.105
        MS-CHAP2-Response=?..9?HnEK?olJ.w.WE........T????.H     b?S??P?e.?r.????
        MS-CHAP-Challenge=p???.??.??q.??9?

08-21/18:29:22  INFO [pool-1-thread-2] radius -  RESPONSE:
Type=AUTHENTICATION_REJECT
Process time auth: 258 common_auth: 143
Attributes:
        Reply-Message=2

08-21/18:25:07  INFO [main] DialUpProcessor - Session detail compress rules:
08-21/18:25:07  INFO [main] processor - Loading NAS list...
08-21/18:25:07 ERROR [main] processor - NAS: 127.0.0.1 can't create connection inspector, className is NULL!
08-21/18:25:07  INFO [main] processor - Starting wait remover timeout=900
08-21/18:25:07  INFO [main] processor - Starting connections month breaker..
08-21/18:25:08  INFO [main] processor - LOADED NAS:  [ NAS-Identifier: localnas; NAS-IP-Address: 127.0.0.1; SECRET: 1; Vendor: 2021 ]
CONFIG: #телефоны по портам, * - все порты (если параметр не указан, вызываемый номер берётся из Calling-Station-Id)
#nas.port_phone.*=900111
#числовые коды услуг времени, трафика входящего и исходящего
nas.port_time.default.*=3
nas.port_traffic.default.*=1:RADIN;2:RADOUT
#разрешение активировать все типы карточек на этом NASе
card.activate.service=0
#поддержка CallBack (1-включите)
callback.support=0
#принудительный разрыв соединений на границе месяца
month.break=1
#интервал между посылками на проверку либо сброс соединения
nas.inspector.sleep_time=60
#максимальное число попыток сброса соединения
nas.inspector.kill.max_messages=5
08-21/18:25:08  INFO [main] processor - Dynamic DNS init => false
08-21/18:25:09  INFO [main] processor - Connection count checker..
08-21/18:25:09  INFO [main] processor - UPDATE mode SLEEP setter, timeout=900

08-21/18:24:31  INFO [main] DefaultServerSetup - Init DB connection pools
08-21/18:24:40  INFO [main] DefaultServerSetup - Init trash pools..
08-21/18:24:48  INFO [main] Server - Starting BGBillingServer..
08-21/18:24:50  INFO [main] Server - HTTP port: 8080
08-21/18:24:50  INFO [main] Server - Starting HTTP connector..
08-21/18:24:51  INFO [main] Server - HTTPS port: -1
08-21/18:24:52  INFO [main] Server - Add mapping: org.apache.catalina.servlets.DefaultServlet to /
08-21/18:24:52  INFO [main] Server - Add mapping: bitel.billing.server.Executer to /executer
08-21/18:24:52  INFO [main] Server - Add mapping: bitel.billing.server.WebExecuter to /webexecuter
08-21/18:24:52  INFO [main] Server - Add mapping: bitel.billing.server.PublicExecuter to /pubexecuter
08-21/18:24:53  INFO [main] Server - Browsing installed modules and plugins...
08-21/18:24:53  INFO [main] Server - dialup v.4.6 build 186 from 30.06.2009 18:11:41
08-21/18:24:53  INFO [main] Server - Add servlet for modules and plugins...
08-21/18:24:53  INFO [main] Server - Creating installed modules map...
08-21/18:24:53  INFO [main] server - Starting listen admin port 2005
08-21/18:25:46  INFO [http-8080-1] Setup - Load config for mid=1

# Authentication

# Name of the local system for authentication purposes
# (must match the second field in /etc/ppp/chap-secrets entries)
name pptpd

# Optional: domain name to use for authentication
# domain mydomain.net

# Strip the domain prefix from the username before authentication.
# (applies if you use pppd with chapms-strip-domain patch)
#chapms-strip-domain
noauth

# Encryption
# Debian: on systems with a kernel built with the package
# kernel-patch-mppe >= 2.4.2 and using ppp >= 2.4.2, ...
# {{{
refuse-pap
refuse-chap
refuse-mschap
# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
require-mschap-v2
# Require MPPE 128-bit encryption
# (note that MPPE requires the use of MSCHAP-V2 during authentication)
#require-mppe-128
# }}}
#mppe required,stateless



# Network and Routing

# If pppd is acting as a server for Microsoft Windows clients, this
# option allows pppd to supply one or two DNS (Domain Name Server)
# addresses to the clients.  The first instance of this option
# specifies the primary DNS address; the second instance (if given)
# specifies the secondary DNS address.
# Attention! This information may not be taken into account by a Windows
# client. See KB311218 in Microsoft's knowledge base for more information.
#ms-dns 10.0.0.1
#ms-dns 10.0.0.2

# If pppd is acting as a server for Microsoft Windows or "Samba"
1Помощь 2Запись 3Блок   4Замена 5Копия  6Перемес7Поиск  8Удалить9МенюMC 10Выход




# Network and Routing

# If pppd is acting as a server for Microsoft Windows clients, this
# option allows pppd to supply one or two DNS (Domain Name Server)
# addresses to the clients.  The first instance of this option
# specifies the primary DNS address; the second instance (if given)
# specifies the secondary DNS address.
# Attention! This information may not be taken into account by a Windows
# client. See KB311218 in Microsoft's knowledge base for more information.
#ms-dns 10.0.0.1
#ms-dns 10.0.0.2

# If pppd is acting as a server for Microsoft Windows or "Samba"
# clients, this option allows pppd to supply one or two WINS (Windows
# Internet Name Services) server addresses to the clients.  The first
# instance of this option specifies the primary WINS address; the
# second instance (if given) specifies the secondary WINS address.
#ms-wins 10.0.0.3
#ms-wins 10.0.0.4

# Add an entry to this system's ARP [Address Resolution Protocol]
# table with the IP address of the peer and the Ethernet address of this
# system.  This will have the effect of making the peer appear to other
# systems to be on the local ethernet.
# (you do not need this if your PPTP server is responsible for routing
# packets to the clients -- James Cameron)
proxyarp

# Debian: do not replace the default route
nodefaultroute


# Logging

# Enable connection debugging facilities.
# (see your syslog configuration for where pppd sends to)
#debug
#logfile /var/log/pppoe-server.log
# Print out all the option values which have been set.
# (often requested by mailing list to verify options)
#dump


# Miscellaneous

# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive
# access.
lock

# Disable BSD-Compress compression
nobsdcomp
nologfd
plugin radius.so
plugin radattr.so

# General settings

# specify which authentication comes first respectively which
# authentication is used. possible values are: "radius" and "local".
# if you specify "radius,local" then the RADIUS server is asked
# first then the local one. if only one keyword is specified only
# this server is asked.
auth_order   radius

# maximum login tries a user has (default 4)
login_tries   4

# timeout for all login tries (default 60)
# if this time is exceeded the user is kicked out
login_timeout   60

# name of the nologin file which when it exists disables logins.
# it may be extended by the ttyname which will result in
# a terminal specific lock (e.g. /etc/nologin.ttyS2 will disable
# logins on /dev/ttyS2)   (default /etc/nologin)
nologin /etc/nologin

# name of the issue file. it's only display when no username is passed
# on the radlogin command line  (default /etc/radiusclient/issue)
issue   /etc/radiusclient/issue

# RADIUS settings

# RADIUS server to use for authentication requests. this config
# item can appear more then one time. if multiple servers are
# defined they are tried in a round robin fashion if one
# server is not answering.
# optionally you can specify a the port number on which is remote
# RADIUS listens separated by a colon from the hostname. if
# no port is specified /etc/services is consulted of the radius
# service. if this fails also a compiled in default is used.
authserver    localhost:1812

# RADIUS server to use for accouting requests. All that I
# said for authserver applies, too.
#
acctserver    localhost:1813

# file holding shared secrets used for the communication
# between the RADIUS client and server
servers      /etc/radiusclient/servers

# dictionary of allowed attributes and values
# just like in the normal RADIUS distributions
dictionary    /etc/radiusclient/dictionary

# program to call for a RADIUS authenticated login
# (default /usr/sbin/login.radius)
login_radius   /usr/sbin/login.radius

# file which holds sequence number for communication with the
# RADIUS server
seqfile      /var/run/radius.seq

# file which specifies mapping between ttyname and NAS-Port attribute
mapfile      /etc/radiusclient/port-id-map

# default authentication realm to append to all usernames if no
# realm was explicitly specified by the user
# the radiusd directly form Livingston doesnt use any realms, so leave
# it blank then
default_realm

# time to wait for a reply from the RADIUS server
radius_timeout   10

# resend request this many times before trying the next server
radius_retries   3

# NAS-Identifier
#
# If supplied, this option will cause the client to send the given string
# as the contents of the NAS-Identifier attribute in RADIUS requests.  No
# NAS-IP-Address attribute will be sent in this case.
#
# The default behavior is to send a NAS-IP-Address option and not send
# a NAS-Identifier.  The value of the NAS-IP-Address option is chosen
# by resolving the system hostname.

# nas_identifier MyUniqueNASName

# LOCAL settings

# program to execute for local login
# it must support the -f flag for preauthenticated login
login_local   /bin/login

#вендоры - производители оборудования и их коды   
vendors=9=Cisco;2011=Huawei;2021=Unix PPP;529=Lucent;6618=Quintum;529=Ascend;311=Microsoft;12341=MPD;14988=Mikrotik
#минимальная и максимальная длина пароля   
min.password.length=4   
max.password.length=15
#требование чтобы в пароле были только цифры   
#passw.content=onlydigit   
#сколько лет отображать в просмотре сессий через web   
showyears=5   
#XSL для печати и отправки на почту сессий   
xslt.1=dialup_login_sessions.xsl   
reportTitle.1=Отчет по сессиям DialUp   
#XSL для печати и отправки на почту наработки по логинам   
xslt.2=dialup_login_amount.xsl   
reportTitle.2=Отчет по наработке на логины DialUp   
#в просмотре сессий в клиенте кол-во выводимых на странице сессий   
show.sessions.on.page=25   
#пункты WEB - меню   
web.menuItem1=Просмотр сессий DialUp   
web.menuItem2=Наработка по логинам DialUp   
web.menuItem3=Cмена пароля на логины DialUp   
#граница некарточных логинов   
top.nocard.login=10000   
   
############### опции RADIUS сервера #######################   
#код модуля "карточки", 0 - модуль "карточки" не используется   
card.module.id=0   
#интервал, с которым запускается проверяльщик   
killer.sleep=10   
#время в сек., через которое происходит пересчет   
update.time=60   
#время в сек., через которое проверяется необходимость пересчета   
run.sleep=3   
#глобальный пул адресов   
pools.global=192.168.10.3-192.168.10.100   
#для DialUP - режим работы   
#1- режим UPDATE - пересчет во время прохождения UPDATE  пакетов   
#2 - режим CHECKER - пересчет по таймеру, UPDATE пакеты используются для получения   
#информации о трафике   
dialup.workmode=1   
#параметры отсылальщика ошибок   
mailer.period=1800   
mailer.to=???   
#разрешение пользователям без определенной группы REALM ов использовать группу default   
realmgr.default=default   
realm.default=Acct-Interim-Interval=60