Victor писал(а):
Код:
attrset.1.title=Канал 64
attrset.1.attributes=Cisco-AVPair=lcp:interface-config=rate-limit output 64000 8000 8000 conform-action transmit exceed-action drop;Cisco-AVPair=lcp:interface-config=rate-limit input 64000 8000 8000 conform-action transmit exceed-action drop
IMHO правильнее будет так:
Код:
attrset.1.title=Канал 64k
attrset.1.attributes=Cisco-AVPair=lcp:interface-config=rate-limit output 64000 12000 24000 conform-action transmit exceed-action drop violate-action drop;Cisco-AVPair=lcp:interface-config=rate-limit input 64000 12000 24000 conform-action transmit exceed-action drop violate-action drop
почему такие значения?
RTFMcisco писал(а):
Cisco recommends the following values for the normal and extended burst parameters:
normal burst = configured rate * (1 byte)/(8 bits) * 1.5 seconds
extended burst = 2 * normal burst
Вход
Регистрация
FAQ
Поиск
