BiTel

# Make sure that this file is mode 600 (readable only to owner)!
#
#Server Name or Client/Server pair      Key      
#----------------            ---------------
#portmaster.elemental.net         hardlyasecret
#portmaster2.elemental.net             donttellanyone
10.222.0.161 12345

# General settings

# specify which authentication comes first respectively which
# authentication is used. possible values are: "radius" and "local".
# if you specify "radius,local" then the RADIUS server is asked
# first then the local one. if only one keyword is specified only
# this server is asked.
auth_order   radius,local

# maximum login tries a user has
login_tries   4

# timeout for all login tries
# if this time is exceeded the user is kicked out
login_timeout   60

# name of the nologin file which when it exists disables logins.
# it may be extended by the ttyname which will result in
# a terminal specific lock (e.g. /etc/nologin.ttyS2 will disable
# logins on /dev/ttyS2)
nologin /etc/nologin

# name of the issue file. it's only display when no username is passed
# on the radlogin command line
# issue   /etc/radiusclient/issue

# RADIUS settings

# RADIUS server to use for authentication requests. this config
# item can appear more then one time. if multiple servers are
# defined they are tried in a round robin fashion if one
# server is not answering.
# optionally you can specify a the port number on which is remote
# RADIUS listens separated by a colon from the hostname. if
# no port is specified /etc/services is consulted of the radius
# service. if this fails also a compiled in default is used.
authserver    10.222.0.161

# RADIUS server to use for accouting requests. All that I
# said for authserver applies, too.
#
acctserver    10.222.0.161

# file holding shared secrets used for the communication
# between the RADIUS client and server
servers      /etc/radiusclient/servers

# dictionary of allowed attributes and values
# just like in the normal RADIUS distributions
dictionary    /etc/radiusclient/dictionary

# program to call for a RADIUS authenticated login
#login_radius   /usr/sbin/login.radius

# file which holds sequence number for communication with the
# RADIUS server
seqfile      /var/run/radius.seq

# file which specifies mapping between ttyname and NAS-Port attribute
mapfile      /etc/radiusclient/port-id-map

# default authentication realm to append to all usernames if no
# realm was explicitly specified by the user
# the radiusd directly form Livingston doesnt use any realms, so leave
# it blank then
default_realm

# time to wait for a reply from the RADIUS server
radius_timeout   10

# resend request this many times before trying the next server
radius_retries   3

# LOCAL settings

# program to execute for local login
# it must support the -f flag for preauthenticated login
#login_local   /bin/login

processor.class=ru.bitel.bgbilling.modules.dialup.radius.DialUpRadiusProcessor
processor.mid=4
db.driver=com.mysql.jdbc.Driver
db.url=jdbc:mysql://127.0.0.1/bgbilling?useUnicode=true&characterEncoding=Cp1251&zeroDateTimeBehavior=convertToNull&jdbcCompliantTruncation=false&elideSetAutoCommits=true&cachePrepStmts=true&queryTimeoutKillsConnection=true
db.user=bill
db.pswd=bgbilling
db.maxIdle=20
db.maxActive=300

mq.url=failover:(nio://127.0.0.1:61616)
mq.user=bill
mq.pswd=bgbilling

auth.port=1812
acct.port=1813
admin.port=1955

auth.thread.count=20
auth.thread.queue=50

acct.thread.count=20
acct.thread.queue=50

#netflow.thread.count=10

#collector.capture.flow.port.1=2001
#collector.capture.flow.port.1.type=netflow
#collector.capture.flow.port.1.thread.count=10
#
#collector.capture.flow.port.2=2002
#collector.capture.flow.port.2.type=sflow
#collector.capture.flow.port.2.sources=0
#collector.capture.flow.port.2.thread.count=10

radius 12-10/14:15:00 ERROR [radiusListener-p-2-t-8] RadiusListenerWorker - NAS not found for packet: Packet type: Access-Request
Identifier: 141
Authenticator: {5D 5A DB CE 44 8B 38 0E 3D 96 BB 06 45 0E 44 AE}
Attributes:
  User-Name=1035
  NAS-IP-Address=127.0.1.1
  NAS-Port=0
  Service-Type=2
  Framed-Protocol=1
  Calling-Station-Id=10.222.1.2

 NAS-IP-Address=127.0.1.1

radius 12-11/08:45:28 ERROR [radiusListener-p-2-t-1] RadiusListenerWorker - NAS not found for packet: Packet type: Access-Request
Identifier: 91
Authenticator: {F5 B6 15 A0 87 8F 56 5E 3A E7 60 30 7A 16 97 34}
Attributes:
  User-Name=1035
  CHAP-Password={1E 45 46 81 03 C4 27 60 D3 9C EB C9 F4 F3 8D E1 7D}
  NAS-IP-Address=127.0.1.1
  NAS-Port=0
  Service-Type=2
  Framed-Protocol=1
  Calling-Station-Id=10.222.1.2
  CHAP-Challenge=][9�a�[TT]��#UB�

radius 12-11/08:45:28 ERROR [radiusListener-p-2-t-1] RadiusListenerWorker - NAS not found for packet: Packet type: Access-Request