BiTel

Есть cisco 7301.
При подключении пользователя выдается ошибка:
Не удается подключиться к удаленному компьютеру. Возможно необходимо согласовать протоколы управления данного компьютера
Вот конфиг, который мастерил по докам из cisco и форума(спасибо lorks, antp):

ip vrf Internet // не знаю как правильно, не разобрался до конца
rd 1:1
route-target export 1:1
route-target import 1:1
!
ip cef
vpdn enable

vpdn-group 1
! Default L2TP VPDN group
accept-dialin
protocol l2tp // нет протокола рррое
virtual-template 1

bba-group pppoe global
virtual-template 1

interface Loopback1
ip vrf forwarding Internet
ip address 192.168.0.221 255.255.255.0

interface GigabitEthernet0/0
ip address 192.168.0.220 255.255.255.0
duplex auto
speed auto
media-type rj45
no negotiation auto

interface GigabitEthernet0/1
no ip address
no ip redirects
duplex auto
speed auto
media-type rj45
no negotiation auto

interface GigabitEthernet0/1.2
description Connect to Radius server
encapsulation dot1Q 2
ip address 192.168.1.220 255.255.255.0
!
interface GigabitEthernet0/1.3
description PPTP clients
encapsulation dot1Q 3
no ip redirects
pppoe enable group global
!
interface GigabitEthernet0/2
no ip address
no ip redirects
shutdown
duplex auto
speed auto
media-type rj45
no negotiation auto
!
interface Virtual-Template1
ip unnumbered GigabitEthernet0/1.3
ppp authentication chap pap pppoe
!
ip default-gateway 192.168.0.1
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.0.1
no ip http server
no ip http secure-server
!
!
ip radius source-interface GigabitEthernet0/1.2
radius-server attribute 44 include-in-access-req
radius-server attribute 32 include-in-access-req
radius-server attribute nas-port format e UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
radius-server configure-nas
radius-server host 192.168.1.222 auth-port 1812 acct-port 1813
radius-server retransmit 1
radius-server timeout 30
radius-server directed-request
radius-server key xxxxxxxx
radius-server vsa send accounting
radius-server vsa send authentication
Если не сложно подскажи, где может быть косяки, радиус сервер BG IPN настроил по доке.

Вот лог радиуса:
INFO 14.02.2008 16:52:42 AUTH:
Type=AUTHENTICATION_REQUEST
Attributes:
User-Name=test
NAS-Identifier=PPPoE
CHAP-Password=.Nÿf´?z .Ò.!@.ã%í
NAS-IP-Address=192.168.1.220
NAS-Port=68
Service-Type=2
Framed-Protocol=1
Acct-Session-Id=00000044
NAS-Port-Type=15
cisco-NAS-Port=0/0/1/3
cisco-avpair=client-mac-address=0003.250f.d4b9

INFO 14.02.2008 16:52:42 RESPONSE:
Type=AUTHENTICATION_ACCEPT
Process time:1
Attributes:
Framed-IP-Address=192.168.3.200
Framed-IP-Netmask=255.255.255.0
cisco-avpair=lcp:interface-config=ip vrf forwarding Internet

INFO 14.02.2008 16:52:42 ACCOUNT:
Type=ACCOUNTING_REQUEST
Attributes:
User-Name=test
NAS-IP-Address=192.168.1.220
NAS-Port=68
Service-Type=2
Framed-Protocol=1
Acct-Status-Type=1
Acct-Delay-Time=0
NAS-Port-Type=15
Acct-Session-Id=00000044
Acct-Authentic=1
cisco-NAS-Port=0/0/1/3
cisco-avpair=client-mac-address=0003.250f.d4b9
cisco-avpair=connect-progress=Call Up

INFO 14.02.2008 16:52:42 RESPONSE:
Type=ACCOUNTING_RESPONSE
Attributes:
INFO 14.02.2008 16:52:42 ACCOUNT:
Type=ACCOUNTING_REQUEST
Attributes:
User-Name=test
NAS-IP-Address=192.168.1.220
NAS-Port=68
Service-Type=2
Framed-Protocol=1
Acct-Input-Octets=66
Acct-Output-Octets=66
Acct-Status-Type=2
Acct-Delay-Time=0
Acct-Session-Time=0
Acct-Input-Packets=3
Acct-Session-Id=00000044
Acct-Authentic=1
Acct-Terminate-Cause=1
Acct-Output-Packets=3
NAS-Port-Type=15
cisco-NAS-Port=0/0/1/3
cisco-avpair=client-mac-address=0003.250f.d4b9
cisco-avpair=connect-progress=Call Up
cisco-avpair=nas-tx-speed=100000000
cisco-avpair=nas-rx-speed=100000000
cisco-avpair=disc-cause-ext=PPP Receive Term

INFO 14.02.2008 16:52:42 RESPONSE:
Type=ACCOUNTING_RESPONSE
Attributes:

С рабочей 7301 выжимка по PPPoE

IOS: c7301-advipservicesk9-mz.124-11.T.bin
Cisco IOS Software, 7301 Software (C7301-ADVIPSERVICESK9-M), Version 12.4(11)T, RELEASE SOFTWARE (fc2)

ой, не посмотрел что конфиг для IPN Я дал для Dialup-модуля..